User guide

MicroLab Software Chapter 3
85
• Alarm levels
Type in the desired minimum and maximum alarm levels. For
the MicroLogPRO model only, if it records a reading that
exceeds either of these alarm levels, the logger’s LCD will
display alarm notification.
To remove the alarm sign from the display, press
either of MicroLogPRO’s two buttons. The default
alarm levels are the lower and upper ends of the
sensors. Click Cancel Alarm to restore the default
levels.
• Alarm time settings
This feature is only relevant when using the wireless cradle
transmitter. Refer to the separate MicroLog wireless solution
user guide.