User guide

MicroLab Software Chapter 3
83
finally, click the seconds (ss) and type 30 or select
30 using the arrows.
Timer run
Select the Timer run check box if you want the data
logger to start recording at a predetermined time.
This option is convenient if you are using several
loggers at once and want them to all begin logging
at the same time.
Use the time and date selectors to set the start time.
Cyclic run
In Cyclic run mode, the data logger overwrites the
old measurements (starting with the oldest recorded
data) once the loggers’s memory is full. Click the
Cyclic run check box to operate in this mode.
If the check box is clear, the data logger will operate