User guide

Chapter 3 MicroLab Software
54
To save data in a different location or under a different name,
use the Save as… command from the File menu:
1. Select Save as… from the File menu.
2. Enter a new name in the File name box.
3. To save the data in a different folder, select a drive
and/or folder from the Save in dialog box.
4. Click Save.
If you’ve downloaded data from more than one data logger
and you want to save all the data sets, select Save all from
the File menu.
Note: If you want to remove unwanted data before saving,
apply the crop tool (refer to page 68).