User guide

Chapter 2 MicroLogPRO
36
Connecting MicroLogPRO to PC USB Port
With MicroLogPRO model EC750 only, you may connect the
logger to the PC USB port using the mini USB cable socket
on the side of the logger.
Once you connect the logger to the PC you will be required
to install the logger USB driver in order for the MicroLab
software to detect the logger. Refer to page
47.
Connecting MicroLogPRO to an External
Sensor
Use the same PC connection socket to connect to an
external sensor (see
Figure 4).
Note that the socket has three pins, with one further away
from the other two (Figure 4). Take care to plug the cable in
correctly.