User guide

MicroLog Chapter 1
5
MicroLog can be used as a stand-alone device to monitor
temperature and humidity levels. All viewing, exporting and
printing of the data obtained is done with just two keys.
MicroLog continuously displays the most recent recordings,
along with the maximum and minimum values for a selected
time interval. Users can also define minimum and maximum
alarm levels for a specific shipment, and the display screen
will begin to flash if either level is breached.
The data stored by MicroLog can be downloaded to any
computer for further viewing and analysis using the MicroLab
software, and can be exported to a spreadsheet.
1.1. Getting Started
In order to save battery life, MicroLog is shipped in Stop
Mode. This means that before you can start recording, you