User guide

MicroLab Software Chapter 3
95
6. Enter the two logger values into the MicroLog value text
boxes.
7. Enter the two reference values into the Reference value
text boxes.
8. Click Calibrate.
To restore default calibration, click Default.
3.2.5. Defining a Custom Sensor
You can use the data logger with any sensor that has a 0 –
20 mA current output or a 0 – 10V voltage output.
1. Click the Logger on the main menu and then select
Define new sensors to open the Define New Sensor
dialog box.
2. Click Add to add a new sensor to the list.