Technical data

Measuring Samples
Agilent MicroLab Software Operation Manual 33
4. Measuring Samples
Cleaning the sample interface 33
Collecting a background measurement 34
Collecting the sample measurement 35
The MicroLab Mobile software is designed to walk the user through
sample measurement. The software displays images and instructions
of the actions that are required by the user for sample measurement.
Following the instructions on the screen ensures consistent
measurement results. For any sample measurement, the following
steps are taken:
 Clean the sample interface.
 Collect a background.
 Place the sample to be measured.
 Collect the sample measurement.
Cleaning the sample interface
The first step in making a sample measurement is to ensure that the
sample mounting interface is clean of any residue from previous
samples or from general use and storage. For specific instructions for
cleaning, refer to the appropriate instrument operation manual
supplied with the system.
CAUTION
Do not break the spectrometer seal and attempt to clean interior surfaces.
Breaking the seal will void the warranty.