Technical data

MicroLab PC
24 Agilent MicroLab Software Operation Manual
Value: The value of the diagnostic that is used with the test state in
order to determine if the component will be displayed.
Example: For a simple univariate method, two components may
be specified for a single analyte; one component would have a
valid calibration over a low range and the other would have a
valid calibration over a high range. The developer may prefer
that only the appropriate range be reported. In this example, the
component will be called ‘area’ and the high range will be valid
from 1000 to 5000 ppm. For this example, Area will be selected
for the Component/diagnostic. First, the Test State of >= will be
selected, along with a value of 1000. After this is Added, the And
qualifier will be selected. Then the Test State of < will be selected
with a value of 5000. In this example, the area component will
now only be reported if the value is between 1000 and 5000.
Example: For a multivariate (PLS) method, one may have several
components specified. Each component may have a different
multivariate calibration. You may only want the component that
has a calibration set that is most closely related to the unknown
sample. In this case, the developer would select the
component/diagnostic to be MDistance (Mahalanobis Distance),
the test state to be <= and the value to be 3. This would only
report values that have a Mahalanobis Distance less than three,
which indicates that the sample is statistically within the group
of the calibration set.
Custom Fields page
Custom fields are available and can be added or deleted by the
administrator. These fields will be visible on the Results screen and
the ROAR report.
Reports page
Available Report Templates: Report templates are defined for
specific types of methods. Component methods use only the Oil
Report. Qualitative search methods can use the Spectrum with
Parameter, Stacked Spectra with Search Results, Stacked Spectrum
with Subtraction and Parameters Summary or the Stacked Spectrum
with Zoomed Overlay templates. Multiple templates can be selected.