User's Manual

Bluetooth
Wireless
connection
Smartphone
Notebook
Tablet
Analog 3.5 mm stereo
connection to media players
Analog options
Smartphone / Tablet /
Mp3 / Mp4 Media player
LCD TV
PC or Notebook
Media
player
CD / VCD / DVD
Blu-Ray player
Connections
EN
5
Power off
Depress the “  ” button for 3 seconds to turn off the system.
(The Red LED will glows for 1 - 2 seconds before turning off,
and a tone beeps)
Low battery warning
The red LED flash
Charging
Insert the micro-USB plug (included USB cable) to the
headset’s micro-USB jack. Insert the other end to the PC’s USB
port or USB Hub to commence charging. (Red LED is on)
Please pre-charge the headset prior to initial use.
Answer call
Depress once the “  ” button to answer incoming call.
End call
Depress once the “  ” button to end the call.
Transfer call voice
Double depress the “  ” button to transfer the call voice
between the mobile phone and device while on going call
Reject call
Depress the “  ” button for 1~2 seconds to reject call when
the call is ringing
Volume up
Depress once the “+” button for volume level increase
Power on
Activate pairing mode
Pairing
Desired Result
Required Action
Depress the “  ” button for 3 seconds to power on the
headset. (Red LED double flash every 3 seconds, and a tone
beeps)
Press the “ +” and “ -” buttons together and hold for 6 seconds.
(White and Red LED quick flash alternately with 2 beep tones).
or depress “ “ for several seconds after power on.
In pairing mode, use a mobile phone with Bluetooth® function,
or other Bluetooth® Master Device to perform pairing action
(detail refer to the paragraph on “pairing”)
Volume Down
Depress once the “-” button for volume level decrease
Next
Depress once the “>” button for next music track on your
Bluetooth® enabled device via AVRCP function
Previous
Depress once the “<” button for previous music track on your
Bluetooth® enabled device via AVRCP function
Battery power indication
After pairing this device to iPhone. The battery power will be
displayed on your iPhone.
Play/pause
Depress once on the “  “ button to play, or pause the music
to commence playback or pause the music respectively.
Multi-point connection
In pairing mode, depress once the “ “ to enable the
“Multi-point” and double depress the “ “ again to disable
the “Multi-point”.
Factory default setting
Long depress “>” and “<” during pairing mode to reset and
clear the paired device list
EN
6
Fold the ear cups
by bending inwards
Folding options
80-T1-97-0001-03 2013-09-12 (New format 22.8 x 130 mm)