Installation Guide

PROJECT LOG
30
Permission granted to copy this form for your personal use.
Project Name: __________________________________Date _______________
Wood Species ______________________________________________________
Number of Legs ____________________________________________________
Leg Dimensions:
Example:
Thickness ______________Width ________________ Length ________________
My Project:
Thickness ______________Width ________________ Length ________________
Saw Blade Height: Always set the blade height at 1/4” above stock.
Different blade height affects Fence Setting.
2” 1.5” 25”
Taper Surface
Example
Side 1 Settings
Side 2 Settings
Side 3 Settings
Side 4 Settings
Side 5 Settings
Side 6 Settings
Side 7 Settings
Side 8 Settings
5” 1.25° or 3/16” 10.25” 90°
Taper starts
inches from top
Taper Degree
or inch/foot
Fence
Setting
Blade
Angle
31
PROJECT LOG
TAPERED LEG EXAMPLES
Eight-Sided Short
Eight-Sided Long
Four-SidedTwo-Sided
RISE AND RUN CALCULATION
In this example, set the Rise
and Run MICRODIAL to 1/4” to
acheive 3/8” taper in 18”
Ex: A leg that tapers 3/8” in 18”
has a taper of 1/4” per foot.
Rise x 12
__________
Run
Rise per foot
=
3/8 x 12
__________
18
1/4
=
1/4”
Rise per foot
Drawing for illustration purposes
(not to scale)
12”
3/8”
Rise
18”
Run