Installation manual

© Microhard Systems Inc. 95
4.0 Configuration
Image 6-48: QoS > Interface
4.8.4 QoS > Interface
This tab is used to configure the LAN, WAN and 4G interfaces for QoS.
Interface Mode
Enable or Disable QoS on the selected interface.
Values (selection)
Enable / Disable
Target
Select the target class for the QoS rule, the class specifics can be
modified in the Class menu.
Values (selection)
High
Medium_high
Medium
Medium_low
Low
Bandwidth
Enter the Bandwidth.
Values (Mbit)
20
QoS Interface LAN / WAN / 4G Configuration.