Installation manual

© Microhard Systems Inc. 93
4.0 Configuration
Image 4-47: QoS > Local
4.8.3 QoS > Local
This tab is used to actually assign data to a QoS class. You can customize the QoS rules to
match the desired operation.
Interface
Select the interface (LAN / WAN / 4G) in which the QoS applies.
Values (selection)
LAN / WAN / 4G
Target
Select the target class for the QoS rule, the class specifics can be
modified in the Class menu.
Values (selection)
High
Medium_high
Medium
Medium_low
Low
Source IP
Enter the source IP.
Values (IP Address)
(IP Address)