Installation manual

© Microhard Systems Inc. 88
4.0 Configuration
Firewall MAC List Configuration (Continued)
Action
The Action is used to define how the rule handles the connection
request.
ACCEPT will allow a connection, while REJECT (error) and DROP
(quietly dropped), will refuse connections.
Values (selection)
ACCEPT
DROP
REJECT
Firewall IP List Configuration
Rule Name
The Rule Name field is required to give the rule a convenient name
for reference. Each rule must have a unique name, up to 10
characters in length.
Values (10 chars)
IP_List
Source Address
Specify the specific IP or Network address (With /subnet, for
example 192.168.0.0/24 will apply to all IP addresses in the
192.168.0.1 - 192.168.0.254 range (subnet /24 = 255.255.255.0).
Values (IP Address)
0.0.0.0/0
Action
The Action is used to define how the rule handles the connection
request. ACCEPT will allow a connection, while REJECT (error)
and DROP (quietly dropped), will refuse connections.
Values (selection)
ACCEPT / DROP / REJECT
Destination Address
Optional, enter a destination IP address to make the IP list more
specific. Leave as 0.0.0.0/0 to not use.
Values (IP Address)
0.0.0.0/0
Source
Enter the specific zone that the IP List will apply to, 4G (Cellular),
WAN , LAN (Ethernet, WiFi) or None (both).
Values (Selection)
LAN / WAN/ 4G / NONE