Installation manual

© Microhard Systems Inc. 86
4.0 Configuration
Protocol
Select the type of transport protocol used. For example Telnet uses
TCP, SNMP uses UDP, etc.
Values
External Port
Port number of incoming request (from 4G/WAN-side).
Values (Port #)
2000
TCP
UDP
Both
Name
This is simply a field where a convenient reference or description is
added to the rule. Each Forward must have a unique rule name and
can use up to 10 characters.
Values (10 chars)
Forward
Internal Server IP
Enter the IP address of the intended internal (i.e. on LAN side of
VIP4G) server. This is the IP address of the device you are
forwarding traffic to.
Values (IP Address)
192.168.2.1
Internal Port
Target port number of internal server on the LAN IP entered above.
Values (Port #)
3000
Source
Select the source for the DMZ traffic, either 4G or from WAN.
Values (selection)
4G / WAN