Installation manual

© Microhard Systems Inc. 85
4.0 Configuration
Image 4-42: Firewall > Port Forwarding
4.6.4 Firewall > Port Forwarding
Port forwarding can be used to forward traffic coming in from the 4G and/or WAN to a specific IP
Address and Port on the LAN. Port forwarding can be used in combination with other firewall
features, but the Firewall must be enabled for Port forwarding to be in effect.
DMZ Server IP
Enter the IP address of the DMZ server on the LAN side of the
VIP4G.
Values (IP Address)
192.168.100.100
Exception Port
Enter a exception port number that will NOT be forwarded to the
DMZ server IP. Usually a configuration or remote management port
that is excluded to retain external control of the VIP4G.
Values (Port #)
443
DMZ Mode
Enable or disable DMZ Mode. DMZ can be used to forward all
traffic to the DMZ Server IP listed below.
Values (selection)
Disable / Enable
DMZ Source
Select the source for the DMZ traffic, either 4G or from WAN.
Values (selection)
4G / WAN