Installation manual

© Microhard Systems Inc. 84
4.0 Configuration
Source IP
If a valid IP/Network address is specified, the action will apply
against that address; otherwise, leaving the default value of
0.0.0.0/0 in this field results in the action applying to all source IP
addresses.
Values (IP Address)
192.168.0.0/255.255.255.0
Destination Zone
Select the zone which is the intended destination of the data traffic.
WAN applies to the wireless connection to the cellular carrier and
the LAN refers to local connections on the IPn3G (Ethernet/WiFi)
Values (selection)
LAN
WAN
4G
None
Destination IP
If a valid IP/Network address is specified, the action will apply
against that address; otherwise, leaving the default value of
0.0.0.0/0 in this field results in the action applying to all source IP
addresses.
Values (IP Address)
192.168.0.0/255.255.255.0
Destination Port
This field is used to define a port or service used in the rule (i.e.
Port 80 = HTTP which is generally a web server)
Values (port)
0
Protocol
The protocol field defines the transport protocol type controlled by
the rule.
Values
TCP
UDP
ICMP
all