Installation manual

© Microhard Systems Inc. 65
4.0 Configuration
Once the RTS Threshold defined packet size is reached, the
system will invoke RTS/CTS flow control. A large RTS
Threshold will improve bandwidth, while a smaller RTS
Threshold will help the system recover from interference or
collisions caused by obstructions.
RTS Thr (256 ~ 2346)
Values (selection)
On / OFF
The Fragmentation Threshold allows the system to change the
maximum RF packet size. Increasing the RF packet size
reduces the need to break packets into smaller fragments.
Increasing the fragmentation threshold slightly may improve
performance if a high packet error rate is experienced.
Fragment Thr (256 ~ 2346)
Values (selection)
On / OFF
Image 4-33: Wireless > Radio Configuration
Radio1 Virtual Interface
The bottom section of the Wireless Configuration provides for the configuration of the Mode of
the Wireless interface, the TX power, Wireless Network information, and Wireless Encryption.
Choose between LAN or WAN for the Wireless interface. If the
unit is configured as a Bridge, only the LAN option will appear
in the drop down list.
Network
Values (selection)
LAN
WAN