Installation manual

© Microhard Systems Inc. 47
4.0 Configuration
Image 4-21: Network > Routes
4.2.5 Network > Routes
Static Route Configuration
It may be desirable to have devices on different subnets to be able to talk to one another. This
can be accomplished with either a static route being defined, or in the case of being able to
automatically share routing information using RIPv2, dynamic routing can be configured.
Routes can be names for easy reference, or to describe the
route being added.
Name
Values (characters)
(no default)
Enter the network IP address for the destination.
Destination
Values (IP Address)
(192.168.168.0)