Installation manual

© Microhard Systems Inc. 46
4.0 Configuration
VLAN1 Configuration
VLAN1 is the native VLAN for VIP4G. By default, all traffic will be added to VLAN1 unless
specified otherwise by adding additional VLAN(s) for the LAN/Wireless Interfaces.
Add a name or other description to VLAN1
Description
Values (characters)
native
Specify which VLAN is used as the management VLAN. By
default only vlan1 is listed until additional VLANs are created in
the VLAN Configuration section below.
Management VLAN
Values (selection)
vlan1
Specify if traffic on the WAN interface is to join VLAN1
WAN
Values (selection)
Join VLAN / No VLAN
Specify if traffic on the Wireless interface is to join VLAN1
Radio1
Values (selection)
Join VLAN / No VLAN
VLANs Configuration
Create VLANs and assign LAN / Wireless Interface as required.
Assign the VLAN ID. Valid VLAN IDs range from 2 - 4094
VLAN ID
Values (value)
Varies (2-4094)
The description field allows the assignment of a name or
description of the VLAN for easy reference.
Description
Values (characters)
varies
Specify if traffic on the Wireless or LAN interface is to Join
(allow to pass through), and/or for the Ethernet frames to be
Tagged for the current VLAN.
WAN / Radio1
Values (selection)
Join VLAN / No VLAN