Installation manual

© Microhard Systems Inc. 34
4.0 Configuration
4.1.4 System > Services
Available Services
Certain services in the VIP4G can be disabled or enabled for either security considerations or
resource/power considerations. The Enable/Disable options are applied after a reboot and will
take affect after each start up. The Start/Restart/Stop functions only apply to the current session
and will not be retained after a power cycle.
Image 4-10: System > Services
The VIP4G has the ability to turn off the RSSI LED’s. The RSSI
value can still be read from the unit, but the status will not be
visible on the unit itself .
RSSI LED
Values (selection)
Enable / Disable
Throughput Test Server
For testing purposes the VIP4G has an internal Iperf server that
can be used to test unit performance. The user must install a
Iperf client to use this functionality.
Enable / Disable
Values (selection)
SSH Service
Using the SSH Service Enable/Disable function, you can
disable the SSH service (Port 22) from running on the VIP4G.
Enable / Disable
Values (selection)
Telnet Service
Using the Telnet Service Enable/Disable function, you can
disable the Telnet service (Port 23) from running on the VIP4G.
Enable / Disable
Values (characters)