Installation manual

© Microhard Systems Inc. 31
4.0 Configuration
If connecting to a NTP time server, specify the timezone from
the dropdown list.
Values (selection)
User Defined (or out of date)
POSIX TZ String
This displays the POSIX TZ String used by the unit as
determined by the timezone setting.
Values (read only)
(varies)
NTP Server
Enter the IP Address or domain name of the desired NTP time
server.
Values (address)
pool.ntp.org
NTP Port
Enter the IP Address or domain name of the desired NTP time
server.
Values (port#)
123
Web Configuration Settings
The last section of the System Setting menu allows the configuration of the HTTP and HTTPS
Ports used for the web server of the WEBUI.
Image 4-7: System Settings > Web Configuration Settings
HTTP Port
The default web server port for the web based configuration
tools used in the VIP is port 80. Change as required, but keep
in mind that if a non standard port is used, it must be specified
in a internet browser to access the unit. (example:
http://192.168.168.1:8080)
Values (port#)
80
Timezone
HTTP Port
The secure web port (HTTPS) can be enabled or disabled
using the HTTP SSL On/Off drop down menu. If enabled, the
port used can be specified, the default is port 443.
Values (port#)
443