Installation manual

© Microhard Systems Inc. 29
4.0 Configuration
4.1.2 System > Settings
System Settings
Options available in the System Settings menu allow for the configuration of the Host Name.
Image 4-5: System Settings > System Settings
The Host Name is a convenient identifier for a specific VIP4G
unit. This feature is most used when accessing units remotely:
a convenient cross-reference for the unit’s WAN IP address.
This name appears when logged into a telnet session, or when
the unit is reporting into Microhard NMS System.
Host Name
Values (characters)
VIP4G+wifi (varies)
up to 30 characters
The Host Name must not
be confused with the
Network Name (SSID)
(Wireless Configuration
menu). The Network
Name MUST be exactly
the same on each wireless
device within a VIP4G
network.