Installation manual

© Microhard Systems Inc. 18
2.3.2 Connecting to WiFi
 Now that the VIP4G has connection to the Cellular Carrier (See Section 2.2) and
the WiFI has been set up (See Section 2.3), WiFi devices should be able to de-
tect and connect to the VIP4G.
 On a WiFi enabled PC/Device, the SSID of MyNetwork, that was created in the
last example should be visible. Connect to that SSID and enter the password.
 Once connected the status should change to connected, and network access
should be enabled.
2.0 Quick Start