Installation manual

2.0 Quick Start

 Connect A PC configured for DHCP directly to one of the LAN ETHERNET ports

of the VIP4G, using an Ethernet Cable. If the PC is configured for DHCP it will

acquire a IP Address from the VIP4G.

 Open a Browser Window and enter the IP address 192.168.168.1 into the ad-

dress bar.

 The IPn3G will then ask for a Username and Password. Enter the factory de-

faults listed below.

192.168.168.1

The factory default

network settings:

IP: 192.168.168.1

Subnet: 255.255.255.0

Gateway: 192.168.168.1

The Factory default login:

User name: admin

Password: admin

The factory default login:

User name: admin

Subnet: admin

It is always a good idea to

change the default admin