Installation manual

© Microhard Systems Inc. 103
4.0 Configuration
Image 4-52: VPN > L2TP Server
4.9.4 VPN > L2TP Server
Enable
Used to enable (checked) is disable (unchecked) the L2TP Server.
Values (checkbox)
Enable (Checked)
Server IP Address
Enter the WAN or 4G IP address on which the L2TP server is to run.
Values (IP Address)
Current IP Address
IP Address Range Start - IP Address Range End
Define the range of IP addresses that can be assigned by the L2TP Server.
Values (IP Address)
IPSec Setup - See previous sections for additional info.