Installation manual

© Microhard Systems Inc. 102
4.0 Configuration
Local Gateway
The 4G IP Address is shown here and cannot be changed.
Values (IP Address)
Current IP
Remote Gateway
Enter the IP Address of the Remote Gateway.
Values (IP Address)
none
Remote Server ID
Enter the Remote Server ID as required by the L2TP server.
Values
none
Remote Subnet IP
Enter the Remote Subnet IP.
Values (IP Address)
none
Remote Subnet Mask
Enter the Remote Subnet Mask
Values (IP Address)
none
Idle time before hanging up
Enter the Idle time (in seconds) to wait before giving up the PPP
connection. The default is 0, which means the time is infinite. (0—65535)
Values (seconds)
0
Username
Enter the Username
Values (chars)
0
Preshared Key
The preshared key is required to connect to the L2TP Server.
Values (chars)
0
IPSec Setup - See previous sections for additional info.