User's Manual

10 Operating Manual: Glossary
A. Approved Antennas
Group Description
Rubber Ducky
4dBi, 5.8GHz Rubber Ducky Antenna RPTNC Swivel
4dBi, 5.8GHz Rubber Ducky Antenna RSMA Swivel
Patch Antennas
23 dBi, 5.8GHz Flat Patch Directional Antenna RSMA Pigtail
WARNING:
Changes or modifications not expressly approved by Microhard Systems Inc. could void the user’s authority to operate
the equipment. This device has been tested with MMCX and Reverse Polarity SMA connectors with the antennas listed
in Appendix A When integrated in OEM products, fixed antennas require installation preventing end-users from
replacing them with non-approved antennas. Antennas not listed in the tables must be tested to comply with FCC
Section 15.203 (unique antenna connectors) and Section 15.247 (emissions). Please Contact Microhard Systems Inc. if
you need more information.
Industry Canada:
This device has been designed to operate with the antennas listed below, and having a maximum gain
of 23 dBi. Antennas not included in this list or having a gain greater than 23 dBi are strictly prohibited for use with this
device. The required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that
required for successful communication.