Specifications

FUNCTIONS TAB

The Functions Tab provides a tool for managing the operating modes. Audio switching for each of MK2R's

six “states” can be defined graphically and each of the eight “Function” memories can be written to the

MK2R.

Each check box on the Function Tab indicates that the associated LED/control is on.

Note: the Transmit State (TX on R1, TX on R2) will override the RX focus state.

Note: the Transmit State is ignored if “Latch” is checked.

Note: the Stereo state overrides all states when selected by the application (logger)

Functions stored in MK2R can be saved to a file and files can be uploaded to MK2R. Users can

exchange configurations by exchanging files.

The control buttons are:

Get: retrieve the selected Function from MK2R.

Get All: retrieve all stored Functions from MK2R.

Store: store the currently selected Function to MK2R.

Store All: store all Functions defined in Router to MK2R.

Load From File: retrieves a single Function from a file

Single function files have a *.u1s extension

Load All From File: retrieves definitions for all Functions from a file

All function files have a *,usc extension

Save to File: store the current Function to a *.u1s file.

Save All to File: store all Function definitions to a *.usc file.

The default location for *.u1s and *.usc files is C:\Program Files\microHAM\cfg