Specifications

3. By right clicking on the system tray icon when the Router is minimized.

The presets and the current router configuration are stored to the registry when

Router is closed and recalled when Router is loaded.

Save as - Saves the current Router settings to a preset for future use.

Rename - Allows renaming of an existing preset.

Delete - Delete chosen preset.

Show buttons - When checked, Router shows the preset buttons.

DEVICE MENU

Router can control several devices. This allows configuring the settings for all connected devices at one

time by using the Presets.

Each device has its own tab (page) in the main Router

notebook. The content of a device tab depends on device

type. Adding a device is automatic the first time Router

detects a supported device (USB driver). Once detected, a

device remains in Router even though device is

disconnected. Each device is identified by product

identification number and a unique serial string.

Rename – Creates a custom device name. This is useful

if two or more devices are connected to the Router. For

example CW KEYER, micro Keyer and USB Interface II

can be renamed to more identifiable names as shown

here..

Delete - Removes a device from the Router. Only

disconnected devices with a RED “X” on device tab can

be removed. To disconnect a device from Router, unplug

the USB cable from the computer or device.

Save Template - will save the current Router settings to template file.

When clicked, Router will open a standard File Save dialog window – the default location is

C:\Documents and Settings\All Users\Application Data\microHAM\cfg. If a hypertext (html) or plain

text (txt) documentation file of the same name as the template is present in the same directory, it will

be associated with the template.

Load Template – will automaticaly configure Router from a template (*.tpl file).

When clicked, Router will open a standard File dialog – the default location is: C:\Documents and

Settings\All Users\Application Data\microHAM\cfg - and the desired template can be chosen. When

Router loads a template, it looks for an html or txt file with the same name as the template in the

same directory. If such file is found, it is displayed.