Setup guide

When using the LPT port, select Classic auto control and assign the control lines on the SO2R tab.
Pin 3 for TX focus (Pin 14 is reverse) Pin 4 for RX focus Pin 5 for Stereo Headphones
These settings allow N1MM Logger to fully control both transmit and receive selection automatically.
Stereo receive is commanded by the ` (backquote or unshifted tilde key) or the {STEREOON} and
{STEREOOFF} macros.
Note: SO2R switching using LPT port and for each radio a footswitch.
Tab: ACC (plaatje niet goed PIN10 selectie gelijk aan Pin 6 maar
dan R2 !!)
13−2−2009 3 PA1T − MK2R+ and N1MM logger setup 36