Setup guide

Tab: Audio Mixer
Rules for audio playback are: Click on "get ID" in router's audio mixer tab. Make sure that
WAVE IN ID == WAVE OUT ID == MIXER ID. The N1MM Logger audio control cannot handle the
situation where the Wave ID <> Mixer ID − it will send (or record as the case may be) audio from the
wrong sound card. If the Wave and Mixer IDs are not the same,set the MicroHAM CODEC as the
windows "default" sound card and confige N1MM Logger to use the default device.
The soundcard name displayed in the audio mixer selection box (left half of the Mixer tab in
MK2R/MK2R+) must match that shown in "Get ID" and the "Select Device" selection box in the
N1MM Logger Audio tab.
13−2−2009 3 PA1T − MK2R+ and N1MM logger setup 32