Setup guide

3 PA1T − MK2R+ and N1MM logger setup
NB. This setup is not maintained anymore since beginning 2008.
This setup is for personal use at the stations PA1T and put on the web so we have this information at
hand wherever we are.
When the Station Master de Luxe is available (end 2008) a new setup will be started.
Back to menu.
Setup Mk2R+ at big gun station PA1T (Timon).
More info about PA1T can be found on http://www.pa1t.com
Station information PA1T Port info Used for
Radio 1 Icom IC−7800
Com
1
Real Banddecoder Radio 1
Radio 2 Yaesu FT−1000mp
Com
2
Banddecoder Radio 2
Banddecoders microHAM (2)
Com
3
Virtual Free
Bandfilters ICE−419A (2)
Com
4
Virtual MK2R − Radio 1
Antenna switch
microHam DOUBLE TEN
switch
Com
5
Virtual MK2R − Radio 2
Antenna's many − big gu
Com
6
Virtual MK2R − PTT 1
Website http://www.pa1t.com
Com
7
Virtual MK2R − PTT 2
Contest logger N1MM logger
Com
8
Virtual MK2R − WinKeyer
PC shack
Core−2−Duo − 2 GHz
1GB memory
LPT 1 Real
MK2R− SO2R
switching
PC real serial ports 3
Vitual serial ports 5
PC LPT ports used 1
Realtek soundcard
problem
Yes
PA1T − Uses LPT for SO2R switching (no microHAM protocol port) due to the number of free serial
ports.
The HF PC of PA1T has the Realtek soundcard problem and needs to have Windows Audio set to the
USB VOICE Codec.
3.1 Radio settings
Proposed settings by microHAM:
TS−2000 ICOM 7800
FT−1000MP, mkV, mkVField
Menu nr.39 = INVERS
Menu nr.50B = 5
Menu nr.50C = 9
Menu nr.50D = 9
Turn OFF internal CW keyer in the radio
Disable ACC input for SSB
DATA OFF MOD = MIC
DATA1 MOD = ACC−A
DATA2 MOD = ACC−A
DATA3 MOD = ACC−A
Turn OFF internal CW keyer in the radio
Set menu 6−1 RTTY polarity to "reversed"
Use PKT mode for AFSK
Turn OFF internal CW keyer in the radio
13−2−2009 3 PA1T − MK2R+ and N1MM logger setup 29