Setup guide

to manually enter the exchange instead of just clicking on it.
By Bill, W6WRT
3.7 Welcome to RTTY Contesting
RTTY is becoming very popular on the HF bands. Many hams, both old timers and new comers, have
gotten RTTY working and made QSOs. Now they are trying RTTY contesting. We, and other RTTY
contesters, have noticed that some RTTY new comers are unaware of efficient contest exchanges or
have picked up a few bad habits. After each RTTY contest there are email discussions about
ineffective (i.e. time consuming) exchanges.
While the newer RTTY contester may be using the contest as a mean towards RTTY WAS or RTTY
DXCC, most of the RTTY contest operators are trying to make as many QSO in the time allotted.
Sending anything but the minimum, required contest exchange slows them down.
To provide guidance, VE2FK wrote an excellent guideline and posted on the RTTY contest reflector.
The following is our updated guidelines:
These operating tips are from the very best operators. This information has been collected from
several RTTY sites in order to standardize contest operations on the air.
Message buffers should have a carriage return (ENTER) at the beginning and only a space at
the end. Following this practice really helps pick out sent information such as a call sign or the
contest exchange.
1.
Start your CQ with the contest name and end it with CQ ex: BARTG DE Mycall Mycall
CQ.This way, a station tuning in midway of your CQ will know you are not calling another
station, but CQ'ing.
2.
Use spaces to separate your numbers, ex: 599 001 001. There is no real reason to use
hyphens. Do not use periods, commas, slant bars. In RTTY it is preferable to send the 3
digits, it's easier to click on 001 than 1. In normal conditions the exchange is sent twice but
the RST only once. In poor conditions exchange may be sent 3 times, ex: 599 001 001 001.
For contests that require a State or Province send the RST once and the State or Province
twice, ex: 599 QC QC.
3.
Do not use 5NN in RTTY, use numbers, ex. 599. RST is sent only once and not repeated if
exchange is sent again. Read the rules, if the RST is not required, don't sent it.
4.
Do not use abbreviation like: PSE, IN, HR IN, NR, PLEASE COPY, RST, BK, KN, PSE,
QSL?, SK etc. Keep the transmission short and limited to just the essential information
needed for the contest exchange.
5.
It is important to have macros to ask for (or repeat) specific information instead of asking for
an entire repeat or sending an entire repeat of an exchange. Repeating the entire exchange
when only one piece of information is needed is a waste of time.Also, have macros ready for
special situation, ex: SRI QRG QRL,SRI YOU ARE OFF FREQ, SRI NO QSY, SRI NO COPY
CUL, etc.
6.
If you are in RUN mode (CQing), reply with (Hiscall) the exchange (Hiscall). If there are many
callers or QRM, it is important to confirm to whom you have sent the exchange. ex: Hiscall
599 001 001 Hiscall.Then, confirm with (TU Hiscall de Mycall CQ) to continue.
7.
If you are in the S&P (Search and Pounce) mode never send your exchange to the CQ'ing
station until he has acknowledged your call and sent his exchange first! Don't send Hiscall but
only Mycall, ex: DE Mycall Mycall, then reply with only your exchange, ex: TU 599 002 002.
(TU says it all: QSL, TU, 73) The DE can be omitted.
8.
Do not use (NAME) while in S&P mode.In RUN MODE, it's your choice to use it or not.9.
Put the word RTTY in the comment field of DX spots.10.
Be on frequency, know how and when to use AFC and NET options in the software or don't
use them.
11.
If you are new to contesting, remember that the top guns are out to make as many QSOs per minute
as possible. Following the above hints will not slow them down. They will be anxious to work you on
another band and in the next contest.
One of the best WEB Sites to get info is : www.rttycontesting.com. It is also a good idea to be a
member of the RTTY reflector. You can subscribe at: http://lists.contesting.com/mailman/listinfo/rtty
13−2−2009 3 N1MM − RTTY operation / settings 50