Setup guide

Mode Tab
•
Contest specific choices♦
SSB/CW operation♦
Mode recorded in log◊
??????⋅
Mode sent to radio◊
Follow mode recorded in log⋅
Log mode/Radio mode: ??????⋅
RTTY operation♦
Mode recorded in log◊
Always: RTTY⋅
Mode sent to radio◊
Follow mode recorded in log⋅
Log mode/Radio mode: RTTY to LSB⋅
Audio Tab
•
2 − Single Card − Two Radio, No Sound Card SO2R♦
Select Device is: USB Voice CODEC or Default?????◊
Select Input Line: Microphone◊
Select Line to Mute: Microphone◊
Recording Bits: 16◊
Sample Rate: 11025◊
Radio Input Port: <blank> Radio Input Port should be blank!◊
If not blank, select another 'Select Device' and switch back to the
USB Voice CODEC. Now it is blank.
⋅
NB.Leave TX Soundcard set for "USB Voice CODEC" with Input Line set to Microphone and Line
to Mute set to anything EXCEPT WAVE. Do not mute Wave!! and do not select the option with 2
soundcards (5$ So2R).
It is not necessary to change CODEC when running Digital modes. The N1MM Logger "Audio"
tab only effects the DVK sound card. The RX soundcard settings are used only if you have selected
"Dual Cards − Two Radio, Sound Card SO2R" (= $5 SO2R).
13−2−20092 SO2R Setup at PA1M − microHAM MK2R+ and Station Masters and N1MM logger 38