Setup guide

By Joe, W4TV: Using the "Functions" tab in Router, create the desired audio switching pattern. Check
the Auto boxes for Transmit Focus, and Headphone Switching as well as Latch and Monitor.
From what you describe it would look something like this:
LEFT RIGHT
A B L R A B A B L R A B
RX on R1 X X
RX on R2 X X
C on R1 X X
C on R2 X X
TX on R1 X X
TX on R2 X X
STEREO X X X X
<FIXED>
Select a "Function" memory to store this configuration and click the "Store" button to write it to the
MK2R. Then click the "Apply" button to make that function active or press the F # button on the MK2R
front panel.
If you need to monitor sidetone when manually transmitting − e.g. to hear sidetone in CW, the
Headphone settings would look something like this:
LEFT RIGHT
A B L R A B A B L R A B
RX on R1 X X
RX on R2 X X
C on R1 X X
13−2−20092 SO2R Setup at PA1M − microHAM MK2R+ and Station Masters and N1MM logger 28