User manual

9
The moving-head can be placed directly on the stage floor or rigged in any orientation on a truss without altering
its operation characteristics .
There are two possibility how to fix the CYCLOPS 150 on a truss via the Omega holders -see the drawing
below.Use the rigging clamps (not included) with screws M12.
For overhead use, always install a safety-rope that can hold at least 10 times the weight of the fixture. You must
only use safety-ropes with screw-on carabines. Pull the safety-rope through the two apertures on the bottom of
the base and over the trussing system etc. Insert the end in the carabine and tighten the fixation screw.
When installing fixtures side-by-side,
avoid illuminating one fixture with another!
DANGER TO LIFE!
Before taking into operation for the first time,the installation has to be
approved by an expert!