Specifications

6
When choosing the location for installation, please make sure that the fixture is
not exposed to extreme heat, moisture or dust. There should not be any cables
lying around. You may endanger yourself and the safety of others!
The minimum distance between light output and the illuminated surface must be
greater than 1 meter (3 Feet).
Make sure that the area below the installation location is blocked when rigging,
derigging or servicing the fixture.
Always secure the fixture with an appropriate safety cable. Secure the safety
cable by the correct holes only.
Only operate the fixture after having checked that the housing is firmly closed
and all screws are tightly fastened.
The lamp must never be ignited if the objective lens or any housing-cover is
open, as discharge lamps may explode and emit a high ultraviolet radiation,
which may cause burns.
The maximum ambient temperature of 45°C (110°F) must never be exceeded.
Otherwise, the lamp shall switch off and will be unable to operate for 5 minutes.
CAUTION!
The lens has to be replaced when it is obviously
damaged, so that its function is impaired,
due to cracks or deep scratches!
Operate the fixture only after having familiarized yourself with its functions.
Do not permit operation by persons not qualified to operate this device.
Most damages are the result of unprofessional operation!
CAUTION!
The lamp has to be replaced when it is damaged
or deformed due to heat!
Please use the original packaging or a specifically designed flight case if the
fixture is to be transported.
Please consider that unauthorized modifications of the fixture are forbidden due
to safety reasons!
If this device is to be operated in any way different from that described in this
manual, the product may suffer damages and the warranty may become void.
Furthermore, any other operation may lead to dangers like short-circuit, burns,
electric shock, burns due to ultraviolet radiation, lamp explosion, etc.