Specifications

28
- Default settings
Press [Enter] to reset all fixture personalities (not the adjusting functions) to the de-
fault values. On the display will appear “rSt” indicating that the fixture Is resetting.
See the table of personality setting and their default positions.
- Adjusting the default positions of colour, gobo and effect wheels
Using this function you can calibrate and adjust the colour, gobo and effect wheels
to their standard/correct positions. Use the [Up] and [Down] keys to browse through
the adjusting menu - the display shows step by step these messages: "PAn, Tilt,
SPEd, Colo, EFEC, Prot, rGOB, Grot, Foc, Stro, dimr, FCAL" by which you can
adjust the fixture to the required / desired position (0-255) before the function cali-
bration. Then when the positioning is finished use the last "FCAL" function (Fixture
calibration).
Checked