Specifications

- Manual control of effects

This function allows you to manually control the channel functions of the fixture.

Use the [Up] and [Down] keys to select the desired function and press [Enter]

to adjust the effect or [Mode] to cancel and return to the menu.

- Lamp On automatically

This function enables the lamp to strike automatically after switching on the fix-

ture. Use the [Up] and [Down] keys to select ”On” if you wish to switch on the

lamp on automatically after switching on the fixture or ”Off” if you wish the lamp

to remain off after switching on the fixture then press [Enter] to confirm or

[Mode] to cancel and return to the menu.

- DMX values

Shows the DMX values of each channel received by the fixture. Use the [Up]

and [Down] keys to select the desired channel then press [Enter] to read its

value coming to the fixture or [Mode] to cancel and return to the menu.

- Automatic blackout of Display

This function allows you to keep the display on or to turn it off automatically 2

minutes after pressing any key on the control panel. Use the [Up] and [Down]

keys to select "On" if you wish to keep the display on or "Off" if you wish to

turn off automatically 2 minutes after last pressing any key on the Control Board

then press [Enter] to confirm or [Mode] to cancel and return to the menu.

- Display intensity

With this function, you can adjust the display intensity from 20 to 100. Use the

[Up] and [Down] keys to select the level of the display intensity then press

[Enter] to confirm or [Mode] to cancel and return to the menu.