Specifications

25
ENGLISH
- Lamp On time
This option enables you to read the total number of hours that the lamp has
been powered on. Press [Enter] or [Mode] to return to the main menu. In order
to reset the counter to 0, you have to hold the Up and Down button and press
the Enter button.
- Power On time
This option allows you to read the total number of hours that the ARENA PRO-
FILE SPOT has been powered on. Press [Enter] or [Mode] to return to the
main menu.
- Switch on / off the lamp
Use the [Up] and [Down] keys to select "On" if you wish to switch the lamp on
or "Off" if you wish to switch the lamp off then press [Enter] to confirm or
[Mode] to cancel and return to the main menu.
- Demo sequences
This function allows you to run special demo test sequences without an
external controller. This will show you some of the capabilities of THE ARENA
PROFILE SPOT. Press the [Up] and [Down] keys to select the "Mod1" or
"Mod2" sequences. The "Mod1" is suitable for projections on the wall, ceilling
or ground without any head-movement, the "Mod2" uses all ARENA PROFILE
SPOT functions and therefore is good for a complete introduction of the fixture.
- Reset Function
Press the [Enter] key to run reset. This option enables the ARENA PRO-
FILE SPOT to index all effects (functions) and return to their standard positions.
7.2 Special Functions
Use the [Up] and [Down] keys to browse through the special functions and
select one by pressing [Enter].