Specifications

7. Control Panel

The Control Panel situated on the topside of the ARENA PROFILE SPOT

offers several features. You can, very simply set the DMX address, read the

number of lamp or unit hours, switch on and off the lamp, run demonstration se-

quences, reset the fixture and also use special functions for manual control and

service purposes.

The main menu is accessed by pressing the [Mode] key - press this key until

the display shows message "A001" (or with the stored address). Browse

through the menu by the pressing the [Up] and [Down] keys - the display shows

step by step these messages: A001, rPAn, rTilt, 16br, Lati, Poti, LAMP,

dEMo, rESE, SPEC. Press [Enter] if you wish to select one of them. The func-

tions provided are described in the following sections and the function hierarchy

is shown below.

7.1 Main functions

- DMX 512 Address settings

The letter "A" flashes. Use the [Up] and [down] keys to select the required ad-

dress (001 - 496) then press [Enter] to confirm or [Mode] to cancel and return

to the main menu.

- Pan reverse

This function allows you to invert the Pan movement. Use the [Up] and [Down]

keys to select "On" if you wish this feature or "Off" if you don’t wish this feature

then press [Enter] to confirm or [Mode] to cancel and return to the main menu.

- Tilt reverse

This function allows you to invert the Tilt movement. Use the [Up] and [Down]

keys to select "On" if you wish this feature or "Off" if you don’t wish this feature

then press [Enter] to confirm or [Mode] to cancel and return to the main menu.

- Movement resolution

By this function you can adjust the desired movement resolution 8 or 16 bit. Use

the [Up] and [Down] keys to select ‘On’ if you wish the 16bit high resolution or

"Off" if you wish only 8 bit resolution then press [Enter] to confirm or [Mode] to

cancel and return to the main menu.

Note: If you adjust the 16-bit resolution the fixture will occupy 16 DMX chan-

nels, if you adjust the 8-bit resolution, the fixture will use only 14 DMX channels.

Please, check the DMX protocol.