Specifications

22
6. Remotely controllable functions
6.1 Lamp
The ARENA PROFILE SPOT is to be installed with a MSD 250 120V lamp.
A relay inside of the ARENA PROFILE SPOT allows you to switch on and off the
lamp via the Control Panel on the fixture or by your DMX controller.
6.2 Switching on and off the lamp via the Control Board
1. Switch on the ARENA PROFILE SPOT and wait until the fixture has homed
2. Press the [Mode] key in order to access the main menu. Browse through the
menu by pressing the [Up] and [Down] keys until the display shows "LAMP".
Confirm by pressing [Enter] key.
3. Use the [Up] and [Down] keys to select "On" for switching the lamp on and
"Off" for switching the lamp off and press [Enter] to confirm or [Mode] to cancel.
Note :
It is also important to note that the discharge lamp is a cold restrike type,
which means that it has to be cold before re-striking. For this reason,
you have to wait 5 minutes (max. speed of fan must be adjusted) after
having switched off the lamp before you can switch it back on again. If
you try to switch on the lamp within 5 minute after having switched it off,
the ARENA PROFILE SPOT will store this information and automatically
ignite the lamp when the 5 minute period has expired. The message
"HEAt" will appear on the control board panel at the backside of the
ARENA PROFILE SPOT. If the lamp attemps ignition seven times un-
successfully, "LA.Er" will appear on the display indicating that the lamp
could be damaged or missing, or there could be a failure of the igniter or
the ballast.
6.3 Colour wheel
The ARENA PROFILE SPOT features a colour wheel with 12 color positions -
11 of these with dichroic colors and the last one open. The wheel can be posi-
tioned between two adjacent colors in any position. It is also possible to rotate
the color-wheel continuously at different speeds for the "Rainbow effect“.