Specifications

13
ENGLISH
3.3 Inserting/Exchanging gobos
DANGER!
Install gobos with the fixture switched off / and
Unplugged from the power supply!
To insert the gobos open the top cover of the head by loosening the 4 Phillips
screws on the front and rear sides of the top cover.
If you wish to use other forms and patterns as the standard gobos, or if gobos
are to be exchanged, please follow the instructions below:
Rotating gobo wheel:
CAUTION!
Never remove the screws of the rotating gobo
as the ball bearings will fall out!
Remove the C-Clip with an appropriate tool. Remove the gobo and insert the
new gobo. Press the C-Clip together and insert it in front of the gobo.