Specifications

11
ENGLISH
Do not operate the fixture with housing cover open!
Lamp Adjustment
The ARENA PROFILE SPOT lamp holder is aligned at the factory. Due to differ-
ences between lamps, fine adjustment may improve light output.
Strike the lamp and focus the light on a flat surface (wall). As the optimum distance
of lamp from lens was adjusted during the installation of the lamp (by turning the
screw "A"), it should only be necessary to adjust only the second position by turning
the screw "B", in order to center the hot-spot (the brightest part of the beam). If the
Hot Spot seems to be too bright, you can lower its intensity by moving the lamp
closer to the reflector. Do so by turning screw "A" until the light is evenly distributed.
If the light on the edge seems to be brighter than the center, the lamp is too close to
the reflector. In this case, you need to move the lamp away from the reflector until
the light is evenly distributed and the beam appears appropriately bright.