Specifications

5.5 Connection to the mains
Verify the power supply settings before applying power!
If you wish to change the power supply settings,see the chapter Appendix.
Connect the fixture to the mains with the enclosed power cable and plug.
The earth has to be connected!
The occupation of the connection-cables is as follows:
Pin
Cable (EU)
International
Brown
Light blue
Yellow/Green
Black
White
Green
Live
Neutral
Earth
Cable (US)
Ø The projector can be placed directly on the stage floor or rigged in any orientation on a
truss without altering its operation characteristics.
Ø For overhead use, always install a safety-rope that can hold at least 10 times the weight of
the fixture. You must only use safety-ropes with screw-on carabines. Pull the safety-rope
through the two apertures on the bottom of the base and over the trussing system etc.
Insert the end in the carabine and tighten the fixation screw.
5.6 DMX-512 connection/connection between fixtures
Secure chainSecure chain
Eye boltEye bolt
Mounting plateMounting plate
ClampClamp
Omega-holde Omega-holde
7