Specifications

Function Table:

Only use a stereo shielded cable and 3-pin XLR-plugs and connectors in order to connect the

controller with the fixture or one fixture with another.

DMX-OUTPUT

DMX-input

1- Ground

2 - Signal (-)

3 - Signal (+)

11 - Ground

2 - Signal (-)

3 - Signal (+)

Occupation of the XLR-connection:

XLR mounting-socket:

XLR mounting-plug:

Caution: At the last fixture, the DMX-cable has to be terminated with a terminator. Solder a

120 resistor between Signal (-) and Signal (+) into a 3-pin XLR-plug and plug it in the

DMX-output of the last fixture.

The transform of the controller line of 3 pins and 5 pins (plug and socket)

6. Control Board Operation

Mode

Function

Condition

Pan movement in positive or negative direction

YES--negative direction

Vertical movement in positive or negative direction

Address code set

Reset

Rainbow color wheel change color linear or stepping

YES--reset

YES--linear

Working mode

DMX512 mode

Automatic

Slave mode

Lamp switch

Lamp on

Lamp off

Software version

Lamp hot

Lamp error