Specifications

4

Clamp Mounting: The MICROH LED SLIM P64 provides a unique mounting bracket assembly that integrates 2 brackets to be used
to mount on a truss or the floor. When mounting this fixture to truss, be sure to secure an appropriately rated clamp to the included
bracket fitted through the center hole. As an added safety measure, be sure to attach at least one properly rated safety cable to the
fixture.

Regardless of the rigging option you choose for your MICROH SLIM P64 wash fixture, always be sure to secure your fixture with a
safety cable. The fixture provides a built-in rigging point for a safety cable on the hanging bracket as illustrated above. Be sure to
only use the designated rigging point for the safety cable and never secure a safety cable to a carrying handle.

5. DMX-512 CONTROL CONNECTIONS
This fixture complies with international USITT DMX standards and can be used with either a 3 pin or 5 pin DMX connector. Plug in
the provided 3 pin XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-pin XLR input of the
MICROH LED SLIM P64. To connect the units to DMX, you must daisy chain the fixtures together as referred in the diagram below.
Always end your DMX-512 connection with a DMX terminator.


For installations where the DMX cable has to run a long distance, or is in an electrically noisy environment, it is recommended to
use a DMX terminator. This helps in preventing corruption of the digital control signal by electrical noise. The DMX terminator is