Specifications

Microframe Corporation
Series 53
4
0 User Guid
e
5
Com A B
Com BTN 10 BTN 9 Com BTN 8 BTN 7 Com BTN 6 BTN 5 Com BTN 4 BTN 3 Com BTN 2 BTN 1
Wiring Configuration
There are several configurations you can use when selecting monitors. EzWait is compatible with
any size LCD or Plasma monitor/television, large and small.
Stand alone configuration
1) After mounting the D5340 system.
2) Plug the power cord into a power outlet.
Multiple monitor configuration
1) After mounting the monitors in the desired positions.
2) Connect the VGA cables to the monitors.
3) Connect the other ends of the VGA cables to the video splitter (1960-0250).
If you don't have a video splitter, one can be purchased from Microframe.
4) Connect the video splitter input to the EzWait Premier output VGA connector.
Connecting input devices
1) If you are controlling the device with hardwired push buttons, connect the buttons
to any of the screw down terminals on the device labeled Btn 1-10 and
any of the Com terminals (see Terminal figure below).
2) Please Note: This device can be connected to D5100 series LED displays using the 485
connection.
6) EzWait Premier can also be controlled by wireless keyfobs.
6) If you are using the keyfobs, connect the antenna.
Screw Down Terminal
485
Powering EzWait Premier
1) The EzWait Server comes with a 6 ft. power cord.
3) Plug the power adapter into a 110v outlet.
4) After plugging in the EzWait Server, it will power on automatically.