Specifications

Microframe Corporation
Series 3500 - MultiPage System
7
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Frequency..................................................
TX Baud Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Distance Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FCC Approval No.......................................
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum Numbers shown on Display ......
Maximum Pagers in Re-Page Queue . . . . . . . .
Auto Delete Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Roll Over Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MULTIPAGE SPECIFICATIONS
On-Premise Paging
MultiPage Transmitter
MultiPage Specifi cations
9" x 7.25" x 1.75"
457.575 MHz
512 or 1200
1/4 to 1/2 Mile Indoors
JRNUSASERILINK
Flat surface
20
30
0-25 minutes(user-selectable)
0-9 seconds (user-selectable)
Support and Sales
800-635-3811
Microframe® Corporation
www.microframecorp.com
PO Box 1700
Broken Arrow, OK 74013
Features
The MultiPage Transmitter can be used to transmit to
the following receivers: The Wireless UHF Display a n d
Vibrating Pagers. The MultiPage LCD screen displays
two lists: The fi rst list consists of the numbers being
shown on the UHF Wireless Display. The second list
shows the Pagers waiting to be re-paged.
Operation
Simply plug the power adapter into the back of the
MultiPage and it is ready to use.To enter a number
on the Wireless UHF Display, type the number and
press "ENTER." To send a page to a Vibrating Pager,
type the number of the Pager you wish to page and
press "SEND," then follow the on-screen prompts. To
remove numbers from the Wireless UHF Display, press
"CANCEL," then type the number you want to remove
and then press "ENTER." To remove numbers from
the vibrating re-paging queue, press "CANCEL," then
type the Pager number followed by "SEND."