Specifications

S eries 3500 - MultiP age S ys tem
9
2.1 IN S TAL L ATI O N
The MultiPage Transmitter is designed to set
on a flat surface or table top or installed on a
mounting wedge for an angle or wall mount. To
use the Transmitter, simply plug the 12-volt DC
power adapter into the back of the MultiPage and
then plug the adapter into the wall. The
MultiPage Transmitter is now ready for use.
2.2 O P E R A T IO N
The MultiPage has three primary opera-
tions: One is to send numbers to Wireless UHF
Displays, to page Vibrating Pagers and to page
the Informant. The "ENTER" key is associated
with Wireless UHF Display functions. The
"SEND" key is associated with Vibrating Pagers
and the Informant. The following examples ex-
plain each of these functions.
2.2.1 T rans mitting to UHF Wireles s
Dis plays
To send a number to a Display, simply type
the number that you want to display, i.e. “1234”
and then press “ENTER.” To delete a number
from the Display, press “CANCEL,” then type the
number, i.e. “1234” then press “ENTER.”
2.2.2 T rans mitting to Vibrating
P agers
To send a page to a Vibrating Pager (i.e. pager
#4), type the pager number “4” then press “SEND."
You will then be prompted for the beep type.
Different beep types can display up to three
different factory programmed text messages on
the Vibrating Pager such as:
"COME NOW"
"NEED HELP"
"CHILD FINE"
Type in the desired beep type, or press "EN-
TER" to accept the default. Pressing "SEND"
from the beep type screen will page the Pager
with a blank message. From the message screen
you can type in the numeric message, i.e. “911”
and then press “ENTER” or “SEND” to send the
page to the Vibrating Pager. If re-page is "ON,"
you will see the message re-paging on the bottom
line of the Transmitters display, followed by the
number of the Vibrating Pager that you just
paged. To stop the re-page of a Vibrating Pager,
press “CANCEL” then type the number of the
Vibrating Pager, i.e. “4” and then press “SEND.”
2.2.3 T rans mitting to the Informant
To page the Informant, simply type in the
address of the Informant, i.e. “400” and then
press “SEND.” You will then be prompted for the
message. Type in the message corresponding to
the action that you want to occur, i.e. Type "1" for
green, "2" for yellow, "3" for red. (See the
Informant Operation Page for more details.)
Then press “SEND” to send the message to the
Informant.
2. 3 C O N F IG UR A TION
The MultiPage Transmitter has several pro-
grammable options. To access these options,
simply press the “(“ from the main screen. Then
press the “(“ or “)” brackets to move up or down
the list of options. When you come to an option
you would like to change, press “ENTER.” De-
pending on the option, you can either press the “(“
and “)” keys to change the value of the option, or
you can use the numbers to type in the desired
value. To return to the main options menu press
“ENTER.” When finished making changes, sim-
ply press the "SEND" key to save the changes or
the "CANCEL" key to discard your changes.
Each of the nine option areas are described in
detail below.
Option 1
T ra ns mitter R oll-O ver T ime
The “Roll-Over” time is the time that each
number in the Transmitter memory shows on
the LCD screen before rotating to the next num-
ber. For example, with the Transmitter Roll-
Over Time set to three seconds, and the Trans-
mitter with “123” and “456” in its memory, the
Transmitter will show “123” for three seconds
and then show “456” for three seconds and then
back to “123.” To change the Transmitter Roll-
Over Time, simply use the “(“ and “) ” keys to
select a time from 1 to 16 seconds. When the
desired time is reached press “ENTER.”
NOTE: The Transmitter Roll-Over Time
is completely independent of the UHF Dis-
play Roll-Over Time.
2 MULTIPAG E OP E R AT ION